Register | Log in

Upgraded suspension – Pro’s vs Con’s


Upgrading your 4×4 suspension undoubtedly improves off-road performance, but is it worth springing a lot of cash for?

There are two main reasons to upgrade your 4×4’s stock suspension to 1) increase load capacity and 2) improve off-road ability.

Overlanders tend to ‘overload’ vehicles with extra fuel, water, tools and camping gear. As a vehicle’s suspension wears, the rear end begins to sag under the added weight, impacting handling and ground/obstacle clearance – also known as a vehicle’s departure angle – at the rear.

Watch this video below to see how the Bilstein South Africa team installed a set of their suspension lift kit on a fourth generation Suzuki Jimny. The Jimny is a great little off-roader, but suffers from severe body roll. The Bilstein suspension upgrade kit is designed to reduce body roll without compromising ride comfort

Installing a suspension-lift kit will improve a vehicle’s off-road ability by optimising approach, departure and break-over angles – now your vehicle can take on steeper obstacles without snagging. Also, the increased wheel travel improves articulation (the ability to keep all wheels in contact with the ground over rough terrain).

It’s important to note that raising suspension by fitting a lift kit won’t improve undercarriage clearance i.e. the space between the lowest point of the undercarriage (differential) and the road surface.
The best way to improve clearance is to fit higher-profile tyres. A lift kit will accommodate bigger tyres because the space between the wheel hub and the mudguard is increased.
Note: Changing stock tyre profiles affects the vehicle’s gearing and so has implications to vehicle torque, fuel consumption and speedometer accuracy.

Installing very big lift kits will require further adjustments to the drive train to maintain its integrity. This is because raising the vehicle’s suspension changes the operating angles of the prop-shafts in relation to the differentials. If it’s not addressed it can introduce vibration and wear, effectively shortening CV joints’ lifespan and long- term vehicle reliability.

Load capacity and sagging issues can be addressed by fitting an extra leaf spring, or a taller or firmer coil spring, depending on the vehicle.
However, firmer suspension will deliver a harder, bumpier ride when the vehicle isn’t loaded. If you use the vehicle to commute, for instance, consider fitting softer springs and/or air-suspension.

Air-helper springs are available in configurations for leaf- and coil-spring vehicles and can be pumped and deflated to compensate for the load.
While they’re a good middle- of-the-road compromise, air- suspension can compromise off-road articulation.
Trail drivers who don’t load very heavily usually fit a soft or intermediate setup to gain ride height without losing on- road comfort.

The challenge for any 4×4 enthusiast is to find a balance between on-road ride comfort and off-road articulation. Any fitment centre will happily tailor the suspension to your desire and application and a good fitter will advise you based on years of vehicle- and application- specific knowledge. However keep in mind lifting is expensive by anyone’s cheque book and eventually becomes an exercise in diminishing returns.


If you would like to get in touch with the Bilstein team for a conversation on the recommended suspension setup for your particular vehicle at competitive prices, please complete the enquiry form below by telling them what vehicle you have. A Bilstein representative will get in touch with you regarding pricing and availability shortly.

Enquire below

    Subscribe to Newsletter:

    Disclaimer: Although the information shown above is presented in good faith and believed to be correct at the time of publishing, SA4x4 makes no representations or warranties as to the completeness or accuracy of the information. SA4x4 has no liability for any errors or omissions in the content freely displayed. Please note that all the prices shown below are subject to change without notice. Due to the nature of imported equipment shown above, please understand that we as a South African market are very dependent on the Rand/ Dollar exchange rates.

    SA4x4 encourages all patrons and users to check pricing of items shown online with vendors directly via our contact form.